 |
Electric Screwdriver
Electric screwdriver with a minimum speed of 3500 rpm. A cordless screwdriver may be used, but check the speed first. |
 |
Pneumatic Gun
If using staples or nails, a pneumatic gun and compressor operating at 7 bar will be needed. (This equipment is available from many hire centers). |
 |
Plumb Line
Plumb line or long spirit level. |
 |
Mastic Gun
Mastic gun for Jointstik tubes. |
 |
Decorator's Scraper
Decorator’s scraper or similar for removing excess Fermacell Jointstik (after curing). |
 |
Fermacell Spatula/Taping Knife
Taping knife for applying Fermacell Joint filler to the joint and for spot filling screw heads. |
 |
Rigid Bladed Scoring Knife
Rigid bladed scoring knife, such as a Fermacell knife, for scoring and snapping the boards. |
 |
A Circular or Jig Saw
A circular or jig saw may also be used to cut fermacell boards. If using a hand-held electric circular saw, we recommend using a vacuum attachment to collect dust. |
 |
Fermacell Spatula o rSteel Towel
for applying Fermacell FST (Fine Surface Treatment). |
|